BVRPN - DURABOND D-30 MARBLE & GRANITE MORTAR

  • MSDS: BVRPN
  • Manufacturer: DAP INC
  • Product Name: DURABOND D-30 MARBLE & GRANITE MORTAR
  • National Stock Number: 8040-00F036359
Product Identification

Product ID:DURABOND D-30 MARBLE & GRANITE MORTAR
MSDS Date:03/04/1992
FSC:8040
NIIN:00F036359
MSDS Number: BVRPN

Responsible Party
DAP INC
5300 HUBERVILLE RD
DAYTON, OH 45401-0277
US

Emergency Phone: 513-667-4461/800-543-3840

Info Phone: 513-667-4461/800-543-3840

Cage: 90300

Contractor
DAP INC.
277 DAYTON, OH 45401-0277 US

Telephone: 513-253-7154/800-543-3840

Cage: 90300

Ingredients

SILICON DIOXIDE, CRYSTALLINE QUARTZ, SAND (ANIMAL

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 50-60%

OSHA PEL 0.1 MG/CUM RESP DUST

ACGIH TLV: 0.1 MG/CUM RESP DUST


TRICALCIUM SILICATE, DICALCIUM

CAS: 65997-15-1

RTECS: VV8770000

Fraction By Weight: 40-50%

OSHA PEL 5 MG/CUM

ACGIH TLV: 10 MG/CUM (DUST)


DOUBLE HYDRATED DOLOMITIC LIME

CAS: 39445-23-3

Fraction By Weight: 1-5%

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:WET CEMENT CAN DRY THE SKIN & CAUSE
ALKALI BURNS. EXPOSURE TO DUST MAY RESULT IN BUILD UP OF MATERIAL
IN EYES, EARS, NOSE & MOUTH WHICH MAY CAUSE IRRITATION. CHRONIC:
INHALATION OF DUST MAY RESULT IN PULMONARY & RESPIRATORY DAMAGE.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:WET CEMENT CAN DRY THE SKIN & CAUSE ALKALI
BURNS. EXPOSURE TO DUST MAY RESULT IN BUILD UP OF MATERIAL IN EYES,
EARS, NOSE & MOUTH WHICH MAY CAUSE IRRITATION. CHRONIC: INHALATION
OF DUST MAY RESULT IN PULMONARY & RESPIRATORY DAMAGE.
Medical Cond Aggravated by Exposure:ASTHMA & ASTHMA-LIKE CONDITIONS

First Aid

First Aid:EYES: FLUSH W/PLENTY OF WATER FOR 15 MINS. SKIN: WASH W/SOAP
& WATER. INHALATION: REMOVE TO FRESH AIR. INGESTION: DON'T INDUCE
VOMITING. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Fire Fighting

Flash Point:>200F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:USE WATER SPRAY TO COOL EXPOSED SURFACES.

Accidental Release

Spill Release Procedures:VACUUM UP & REUSE EXCESS POWDER. PLACE
REMAINING POWDER INTO CONTAINERS. IF ALLOWED TO DRY, SCRAPE UP
DRIED MATERIAL & PLACE INTO CONTAINERS.

Handling

Handling and Storage Precautions:STORE AWAY FROM ACIDS, CAUSTICS &
OXIDIZERS. KEEP CONTAINERS TIGHTLY CLOSED WHEN NOT IN USE. KEEP
FROM EXCESSIVE HEAT & FREEZING.
Other Precautions:KEEP OUT OF REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:8 HOUR EXPOSURE LIMIT/VALUE IS EXCEEDED FOR ANY
COMPONENT, USE AN APPROVED NIOSH/OSHA RESPIRATOR.
Ventilation:IF DRY SANDING, PROVIDE SUFFICIENT MECHANICAL TO MAINTAIN
EXPOSURE BELOW PEL & TLV.
Protective Gloves:RECOMMENDED
Eye Protection:SAFETY GLASSES W/SIDE SHIELDS
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health

Chemical Properties

Spec Gravity:2.6-2.7
Solubility in Water:DISPERSES
Appearance and Odor:SANDY GRAY/WHITE FREE FLOWING POWDER
Percent Volatiles by Volume:<1

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS, STRONG OXIDIZERS, & CAUSTICS.
Stability Condition to Avoid:EXCESSIVE HEAT & FREEZING.

Disposal

Waste Disposal Methods:DON'T REUSE EMPTY CONTAINERS. DISPOSE OF
IAW/LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.